There are three possibilities with overviews from an aircraft.
1. (Your image posted here).... Should have been uploaded with the aircraft registration and c/n. The airport is as shown. Categories required = "wing view" and "airport"
So to precis that, fill in ...
-Aircraft registration.
-Airport ICAO code.
-Genre (check correct)
-Location (should autofill,)
-Aircraft type (Should autofill, manually fill in type from list if required)
-Airline. (Should autofill, otherwise manually fill from list. If small prop then Private)
-c/n. (should autofill, manually fill if required)
-Date and remarks as required. (In your case, ******* airport seen from *aircraft registration*)
-Categories. In this case Airport and Wing view plus any others that apply such as Small Prop etc.)
2. Same type of wing view but no airport in view.
-Registration. insert aircraft registration.
-Airport. Leave blank.
-Genre (check correct)
-Location. Go to "Show menu". select country in first box( only use "International Airspace" if over one of the great oceans. Everywhere else is someones airspace), select "Inflight" in second box.
-Aircraft type (Should autofill, manually fill in type from list if required)
-Airline. (Should autofill, otherwise manually fill from list. If small prop then Private)
-c/n. (should autofill, manually fill if required)
-Date and remarks as required.
-Categories. In this case Airport and Wing view plus any others that apply such as Small Prop etc.)
3. Airport in view but no wing in view.
-Registration. Insert airport ICAO code
-Airport. Insert airport ICAO code.
-Genre (check correct. Civil airport = civil. Military airport = military))
-Location (should autofill,)
-Aircraft type. Will default to Airport
-Airline. Select Airport overview
-c/n. Leave blank
-Date and remarks as required.
-Categories. Select Airport.
NOTE Shots of a general scenery view with no part of the aircraft you are in, or another aircraft visible are not accepted for "Motive" reasons.
It would be very nice if LOTS of uploaders read this.

